Design Criteria:

     The poles shown will accept test loads equivalent to the calculated loads developed by the velocity pressure of wind of at least 100 mph. Designs are then calculated accordingly and adjusted for the height above ground, structure and luminaries shapes.

Effective projected areas (EPA) are actual areas adjusted with the appropriate shape factors.

Maximum luminaries weight is 75#.

Maximum EPA is 1.5 Sq. Ft.

For pole designs with criteria greater than stated above, consult directly with Flagpoles, Inc.

Features:

2 3/8" OD x 4" long tenon welded to floodlighting pole top if required.

Cast aluminum shoe base welded to pole shaft (for anchor based poles) alloy 356-T6.

Standard finish is clean mill finish.

Anchor based poles furnished with four (4) anchor bolts, per ASTM A576 with washers, nuts and template if required.

Reinforced hand hole with cover provided on all poles where required.

Optional Features:

Fabricated base cover, split for easy installation - add suffix B.C. to pole catalog number.

3" O.D. x 4" long tenon welded to floodlighting pole top - add suffix 3T to pole catalog number.

Poles can be directly embedded - add suffix DB to pole catalog number.

Poles can be drilled to accept a side mount luminaries and a cast pole top cap will be supplied - add suffix DC to pole catalog number.

Flagpoles, Inc. reserves the right to change any or all of the preceding specifications without prior notice when deemed necessary in the interest of improving its products.